A swap body is a cargo unit that can be detached as a whole from a truck chassis and transferred to another.
The core value of a standard swap body lies in the ability to rapidly detach and swap the cargo unit from the vehicle chassis, thereby reducing waiting times during loading and unloading and enhancing the turnover efficiency of both the vehicle and the logistics system. Refrigerated swap bodies build upon this by adding temperature-controlled transport requirements: the unit must not only detach quickly but also maintain a stable internal temperature while separated from the truck chassis—whether parked independently or awaiting further transport. Consequently, compared to standard swap bodies, refrigerated swap bodies face more rigorous technical requirements regarding body materials, structural design, refrigeration equipment, power supply, and temperature management.
Description

- The vehicle and the cargo unit operate independently.
After transporting a loaded unit to a warehouse, the truck does not need to wait for workers to unload the cargo; instead, it drops off the entire unit, picks up another one that is already prepared, and drives away immediately. The detached unit can remain at the warehouse for loading or unloading at a leisurely pace, thereby significantly reducing waiting times for both the driver and the vehicle.
- No crane is required to swap the body.
The unit is equipped with four foldable support legs. The vehicle lowers its chassis using air suspension to drive out from underneath the unit, leaving it supported independently on the ground by the legs; the process is reversed to pick the unit up.
How to Operate a Swap Body?
- Lift Body: Raise the swap body off the chassis.
- Lower Legs: Extend the front and rear support legs downwards to provide stable support on the ground.
- Drive Chassis Out: Once the body is securely supported by the legs, drive the vehicle/chassis out from underneath it.
- Body Parked: With the chassis fully removed, the swap body remains parked, independently supported by its legs.

Specifications
| Dimensions (LxWxH) | 7.3 m × 2.46 m × 2.39 m or customized |
| Box panels | Gelcoat FRP (GRP) skin polyurethane foam sandwich panels |
| Floor | Patterned aluminum plate |
| Panel thickness | Top plate: 80mm |
| Side panel: 80mm | |
| Front panel: 80mm | |
| Door panel: 80mm | |
| Floor panel: 100mm | |
| Door design | Double rear door |
| Door frame | Stamped mirror 304 stainless steel |
| Door retainer | Hook type, 304 stainless steel |
| Hinge | 304 stainless steel |
| Cargo rail | Horizontal E-track, 304 stainless steel |
| Door lock | Exposed lock bar, 304 stainless steel |
| Kick plate | 6061 or 6063 Corrugated aluminum alloy sheet |
| Connecting profile | 6061 or 6063 aluminum alloy extrusion profile |
| Subframe | T700 galvanized steel |
| 6061 aluminum alloy | |
| Door seal | EPDM rubber |
| Refrigeration unit (Optional) | Thermo King, Carrier, Supersnow, etc |
| Customizable accessories | Signal lights, meat rail systems, support rods, ventilation fans, door curtains, interior lights, ventilation fans, bumper strips, etc. |
TOPOLO Customized Refrigerated Swap Body Solutions
CKD / SKD / CBU
TOPOLO provides customized refrigerated swap body solutions for commercial vehicle manufacturers and upfitters, covering the entire process—from body design and composite insulation panels to structural components, body kits, and assembly. Tailored to the client’s production capabilities, procurement models, and target markets, TOPOLO offers flexible supply options such as CKD (Completely Knocked Down) and SKD (Semi Knocked Down) Kits, and CBU (Completely Built Up) to support the smooth advancement of their projects.
CKD (Completely Knocked Down)
- Export of fully knocked-down components, fully assembled in local factories.
- Minimize tariffs and transportation costs.
- Support local production and employment.
SKD (Semi-Knocked Down)
- Semi-knocked-down model, core components assembled on-site.
- Balance tariff savings and assembly efficiency.
- The best choice for customers with basic assembly facilities.
CBU (Completely Built Up)
- Export of complete vehicles, ready for immediate use.
- Guaranteed consistent factory quality.
- Fastest delivery, no assembly facilities required.
Insulated Body Panels



The insulated swap body is constructed using insulated FRP composite panels, offering a combination of thermal insulation, structural strength, lightweight properties, and durability. The composite panel structure—featuring a low-thermal-conductivity foam core—helps maintain a stable internal temperature while minimizing the impact of the external environment on the cargo. The flooring surface can be configured with properties such as wear resistance, slip resistance, moisture resistance, and ease of cleaning to meet specific application needs, making it suitable for cold-chain transport environments that demand high standards of hygiene, durability, and temperature control.
Swap Body Support System – Telescopic Legs
- The telescopic legs feature a multi-stage nested structure, enabling height adjustment through the sliding of inner and outer tubes. Depending on the specific design, they can be equipped with mechanical locks, pin-based locking mechanisms, or other reliable height-securing systems.
- Made from high-strength galvanized steel, the legs can be finished with hot-dip galvanizing, powder coating, or other anti-corrosion treatments to enhance weather resistance and service life.

Customized Body Parts
Supports both standardized and non-standard custom production.
















